300048,1,"Open",3,1258,"Raphaël Hertzog",100,"Nobody","2003-06-05 19:35","","2010-07-22 14:53","Write down approval policy and put it in the doc manager","The project approval policy (as documented in the debian-devel-announce initial mails) ought to be documented somewhere ... and possibly in a document that would be available in the ""doc manager"" of the ""siteadmin "" project. Those documents should be linked from the project registration pages and they should be mentionned in the rejection mails (in particular the one called ""does not match criteria"").","None","None","None","None" 300452,1,"Open",4,3312,"Ernesto Domato",100,"Nobody","2004-01-14 18:56","","2012-02-26 16:26","spanish version of first.php page (the one when you login for the first time) is not up-to-date","when you log for the first time you are redirected to http://alioth.debian.org/account/first.php and on that page there is a link called ""documentacion"" on the spanish version (documentation in englush) that points to http://alioth.debian.org/docs/site/ but when you follow the link you get a page where it says ""PAGINA NO ENCONTRADA"" (page not found in english). i checked the english version of the first.php page and it doesn't have that link so i guess that the spanish one should be updated. to fix the problem and have the spanish version to be as the english one delete the line that says: ""Tiene que dedicar cierto tiempo para leer la documentación de forma que pueda tomar partido totalmente de Alioth."" cause that line doesn't exist on the english version greettings. Ernesto","None","None","None","None" 300755,1,"Open",1,3417,"Paul Baker",100,"Nobody","2004-05-29 19:11","","2006-10-27 15:35","Make survey's anonymous","Is there anyway to make it so that survey's don't require a login? I set up a survey but haven't gotten any responses, and I'm pretty sure because it requires you create a login before you can see it. Any chance to get rid of this requirement?","None","None","Wont Fix","None" 300785,1,"Open",3,2415,"Enrico Zini",2203,"Roland Mas","2004-06-02 17:34","","2006-10-27 15:35","Per-group upload queue and repository?","Hello, with the Debian-np group, we've had the necessity of using an upload queue sending packages to an APT repository of ours. This led me to observe that most of Alioth is about writing Debian packages, but Alioth doesn't provide facilities for sharing these packages for testing or previewing before they get into Debian. I'm thus writing this note to share the idea. I think it'd be a very important facility to have. Bye, Enrico","GForge/FusionForge","None","None","None" 300855,1,"Open",3,10446,"Christoph Berg",2203,"Roland Mas","2004-07-26 12:36","","2006-10-27 15:35","Project description cannot be full 255 characters","When I tried to apply for the ""ircmarkers"" project, I was first told by the web interface to cut the public project description down to 255 chars. I then submitted a 253 char description (counted with 'wc') which yielded the error: ERROR: Could not create group: ERROR: value too long for type character varying(255) The final 242 char description went through fine. Christoph PS: increasing the total length allowed would also be nice, maybe 511 chars?","GForge/FusionForge","None","None","None" 300871,1,"Open",1,100,"Nobody",100,"Nobody","2004-08-03 19:42","","2007-02-17 13:30","email address in bug reports, when not logged in, is lost","If a user without an account on alioth reports a bug and fill his email in ""If you cannot login, then enter your email address here::"" this email is lost and not visible in the bug report. For example I entered my email (rousseau@debian.org) for this bug report and you will not see it anywhere. Thanks,","GForge/FusionForge","None","Wont Fix","Need upstream change" 301342,1,"Open",2,10612,"Isaac Gouy",2203,"Roland Mas","2005-03-30 16:24","","2007-02-17 13:31","Tracker - Group menu items not alpha sorted","Whenever we add a new item to Group, the order of the menus is messed-up. Make Group menu items alphabetically sorted like Category menu items, and we'll choose names to get the order we want.","GForge/FusionForge","None","None","Need upstream change" 301343,1,"Open",1,10612,"Isaac Gouy",100,"Nobody","2005-03-30 16:31","","2007-02-17 13:30","Tracker & GForge - Active/Inactive Artifacts","We can add Users to a GForge project but we don't seem able to remove them. We can add a Groups to a Tracker but we don't seem able to remove them. Presumably the rationale has to do with data consistency, which is fine. Instead, let us mark Users and Groups and other artifacts as Active (default) or Inactive. Then build the GForge webpages from Active values. (Some of the pages would need both - to search historic data.)","GForge/FusionForge","None","None","Need upstream change" 301395,1,"Open",2,11483,"Lionel Elie Mamane",100,"Nobody","2005-04-07 07:54","","2007-02-17 13:30","Welcome mail has dangling pointer","The ""Alioth Project Approved"" mail says: Please read site documentation (see link below) But there is no link to site documentaion in the email. The only link (occurrence of the string http, at least) is to the new project's admin page.","GForge/FusionForge","None","None","Need upstream change" 302139,1,"Open",3,100,"Nobody",100,"Nobody","2005-09-05 15:48","","2006-10-27 15:35","Digest mailing list messages contain no Message-ID","I was referred to alioth administrators by the mailing list administrator for pkg-exim4-users@lists.alioth.debian.org. The following message was received in a probe to validate list membership (note the SMTP response from Exim4) > > >A message that you sent could not be delivered to one or more of its >recipients. This is a permanent error. The following address(es) failed: > > admin@jbgreen.com > SMTP error from remote mailer after end of data: > host mail.jbgreen.com [24.234.158.164]: 550-RFC2822 says you SHOULD have a Message-ID or X-Mailer > 550 Most messages without it are spam, so your mail has been rejected > Non-digest and probe messages are received, but digest messages contain no Message-ID or X-Mailer headers (see below) and are therefore rejected. As the probe and non-digest messages arrive successfully, I have to question if there's a technical point for not having a Message-ID header in non-digest messages. > > >------ This is a copy of the message, including all the headers. ------ > >Return-path: >Received: from localhost ([127.0.0.1]:33429 helo=haydn.debian.org) > by haydn.debian.org with esmtp (Exim 4.50) > id 1EA0uY-0007qA-Ey; Tue, 30 Aug 2005 07:52:02 +0000 >From: pkg-exim4-users-request@lists.alioth.debian.org >Subject: Pkg-exim4-users Digest, Vol 2, Issue 15 >To: pkg-exim4-users@lists.alioth.debian.org >Reply-To: pkg-exim4-users@lists.alioth.debian.org >MIME-Version: 1.0 >Content-Type: text/plain; charset=""us-ascii"" >Content-Transfer-Encoding: 8bit >X-BeenThere: pkg-exim4-users@lists.alioth.debian.org >X-Mailman-Version: 2.1.5 >Precedence: list >List-Id: ""User-level discussion and support for the Debian packages."" > >List-Unsubscribe: , > >List-Archive: >List-Post: >List-Help: >List-Subscribe: , > >Sender: pkg-exim4-users-bounces@lists.alioth.debian.org >Errors-To: pkg-exim4-users-bounces@lists.alioth.debian.org >X-SA-Exim-Connect-IP: 127.0.0.1 >X-SA-Exim-Mail-From: pkg-exim4-users-bounces@lists.alioth.debian.org >X-SA-Exim-Scanned: No (on haydn.debian.org); SAEximRunCond expanded to false > ","Mailinglists","None","None","None" 302726,1,"Open",3,11473,"Thomas Viehmann",100,"Nobody","2005-12-16 17:58","","2006-10-27 15:35","Please use whitelist from lists.debian.org","Hi, thanks for alioth! With more and more projects and package maintenance teams using alioth lists and turning on subscription-only posting due to spam, I think it would improve interaction with other Debian people if alioth could make use of the global Debian whitelist. Thank you very much for your kind consideration. Cheers, Thomas","Mailinglists","None","None","None" 303555,1,"Open",4,10612,"Isaac Gouy",2203,"Roland Mas","2006-06-13 13:45","","2006-10-27 15:35","SPAM in tracker item comments","We're seeing more SPAM in Tracker item comments, like these car insurance http://alioth.debian.org/tracker/?func=detail&atid=411005&aid=302888&group_id=30402 ringtones http://us.f338.mail.yahoo.com/ym/ShowLetter?MsgId=5685_140867_159_1301_2539_0_17551_8387_4245257034&Idx=13&YY=26171&inc=25&order=down&sort=date&pos=0&view=a&head=b&box=Inbox Any suggestions on how we can stop the SPAM while still allowing anonymous comments? Any suggestion on how we can delete the SPAM comments? ","GForge/FusionForge","None","None","Need upstream change" 304040,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2006-10-27 21:51","","2006-10-27 21:51","page view statistics no longer available?","Yesterday I could see page view statistics from the link on the project home page - that no longer seems to be available? ","GForge/FusionForge","None","None","None" 304042,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2006-10-27 21:59","","2006-10-27 21:59","Gray on Gray is really hard to read - tracker items","Two instant comments on the ""new look"" GForge webpages 1) It's really hard to read the Gray text tracker items on a Gray background, Black text on a white background is really easy to read. The ""new look"" seems to have made the unimportant background areas white, and the important content areas that carry information have been made gray - that's the wrong way around - gray out the unimportant background areas and highlight the important content areas. 2) The blue ""Advanced Search"" text link on the navy background, by the Search button is barely visible.","GForge/FusionForge","None","None","None" 304043,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2006-10-27 23:14","","2006-10-27 23:14","Tracker page column order","For languages were we read left-to-right the most important information should be at the left hand side. The left most thing repeated in each the tracker page http://alioth.debian.org/tracker/?group_id=30402 is an identical icon which I guess is intended to show that we can click on a link in a webpage - maybe it would be better to just underline the linktext so it looks like every other linktext on the web. (Having a pointy finger icon on the page really doesn't help.) I don't know how other people use the tracker page http://alioth.debian.org/tracker/?group_id=30402 My usage pattern is simply to look if the number of tracker items has increased and then go see what they are. Before the ""new look"" that was really easy, now I have to scan from the tracker name through the description to the end of the line - I have to visually search for the information. Before the ""new look"" those numbers were bold so they were real easy to read. ","GForge/FusionForge","None","None","None" 304044,1,"Open",3,10612,"Isaac Gouy",2203,"Roland Mas","2006-10-28 01:17","","2010-04-20 18:25","No statistics shown on project activity page","After clicking refresh, it seems like a broken image is downloaded which flashes briefly in the web browser window and then disappears. http://alioth.debian.org/project/stats/index.php?group_id=30402&area=tracker&SPAN=1&start=1136073600&end=1162339200&submit=Refresh","GForge/FusionForge","None","Fixed","None" 304119,1,"Open",3,13511,"Charles Plessy",2203,"Roland Mas","2007-03-10 07:36","","2007-03-10 08:40","Archive page when a list is empty gives a wrong pointer","Dear admins, the list http://lists.alioth.debian.org/mailmanlistinfo/pkg-emboss-commits seems to have been lost after the incident of February. Could you re-create it ? Have a nice week-end et merci beaucoup. -- Charles Plessy Wako, Saitama, Japan Debian-Med packaging team","Mailinglists","None","None","None" 304160,1,"Open",3,12892,"Loïc Minier",100,"Nobody","2007-03-20 17:42","","2007-03-20 17:42","Please set ACLs in group /home dirs and SVN repos","Hi, We often have to chase people who created files without the proper umask in the group home dir or in the web pages or in the SVN. Please add propert ACLs when creating group homes or SVN repos and please fix the existing /homes and /svns. setfacl -n -d -m group::rwx htdocs Thanks! Bye,","None","None","None","None" 304337,1,"Open",3,13427,"Cameron Dale",100,"Nobody","2007-04-12 20:55","","2007-04-12 20:55","New Project Propsoal not ""Comprehensive"" enough?","I was just trying to submit a new project, and I kept getting an error saying that my purpose was not ""comprehensive"" enough. Not knowing what this meant, I tried to add more information (which is what comprehensive means: ""including all or everything""), but the submission kept failing. Finally I decided to try removing some information, and then it submitted fine. There is no mention of a limit on the size of the purpose field, and the wording of the error is definitely misleading in this case (if too much information was causing the error).","None","None","None","None" 304644,1,"Open",5,1258,"Raphaël Hertzog",100,"Nobody","2007-07-26 08:38","","2007-07-26 08:38","Adding members who request to join via the ""pending request"" form is suboptimal","Here are the various problems: - the mail sent to admins when a user request to be added does not have a valid from that can be used to engage a discussion with the user - the user can request access without telling why he requests access, he shouldn't be able to let the field empty - when the admin approves the request, the user doesn't receive a notice that he has been added to the project - when the admin rejects the request, he doesn't have the possibility to send an explanation to the user why his request he rejected - when an admin approves/rejects a request, the other admins are not informed by email, they have to fire up the web browser to discover that someone else already handled the request It would be nice to see this fixed, as some team handle many requests (Perl team, python team, collab-maint, etc.).","GForge/FusionForge","None","None","Need upstream change" 304650,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2007-07-28 14:25","","2007-07-28 14:25","Allowing to remove spam from mailman web archive","I was trying to clean up some of the alioth mailman based mailing lists web archives for which I'm the admin, and found that this could be done by removing the mails from the mbox that stores the mailing list and then running mm_arch. The problem is that I don't have perms on that file, it's owned by list:list and there's no additional ACLs. I'm not sure how mm_arch will act with removed mails and the file names for its generated webpages, thus preserving or destroying references. But I could solve it by introducing a dummy mail or something.","Mailinglists","None","None","None" 306740,1,"Open",3,19887,"Richard Hartmann",100,"Nobody","2007-11-13 00:26","","2007-11-13 00:26","Provide a way to set the default shell via the Account settings","It would be rather convenient if one were able to choose the desired default shell via per https://alioth.debian.org/account/ , especially as chsh is not able to cope with the PAM setup and aborts with an error when you try to switch to another shell. A dropdown menu of non-commented lines in /etc/shells would probably be the cleanest & fastest solution.","GForge/FusionForge","None","None","None" 310179,1,"Open",3,19356,"Luca Capello",100,"Nobody","2007-12-11 15:11","","2007-12-11 15:11","[darcs.d.o] add darcs/users prefix before personal repositories","ATM the Debian darcs server hosts personal repositories in the form darcs.d.o/~$LOGIN/$REPO Following a discussion on d-devel started at [1] and in order to preserve consistency with (at least) git.d.o [2], I propose to have personal repositories hosted as darcs.d.o/darcs/users/$LOGIN/$REPO This will also help in solving bug #445714 [3] in a general way instead of implementing a Darcs-specific ugly hack. [1] http://lists.debian.org/debian-devel/2007/10/msg00693.html [2] darcsweb is inspired by gitweb [3] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=445714 ","None","None","None","None" 310180,1,"Open",3,19356,"Luca Capello",100,"Nobody","2007-12-11 15:24","","2007-12-11 15:24","[darcs.d.o] mimic other Debian VCS servers in configuration","While darcs.d.o is working without any (known) problem, its configuration is different from any other VCS server, i.e. ===== gismo@alioth:~$ ls /srv/darcs.debian.org/ bin cgi-bin darcs darcswebcache users gismo@alioth:~$ ls /srv/git.debian.org/ bin etc git http gismo@alioth:~$ ===== If Alioth RT #310179 [1] will be implemented, darcs.d.o configuration should be modified to mimic other VCS ones (to preserve consistency). [1] http://alioth.debian.org/tracker/index.php?aid=310179 ","None","None","None","None" 310498,1,"Open",3,19887,"Richard Hartmann",100,"Nobody","2008-01-08 23:39","","2008-01-08 23:39","Show nickname as well as name in project participant overview","Severity: wishlist Basically, https://alioth.debian.org/projects/siteadmin/ would show Christian Bayle (bayle) or, in my eyes, preferably, Christian ""bayle"" Bayle etc etc in the overview. Of course, there are different options of what is actually shown. IRC nick or login name would probably be best, where I prefer IRC nick, but that is not in the database, according to sgran. In case one were to choose IRC nick and there is no entry in the database, the name would be shown like Christian Bayle etc. ","GForge/FusionForge","None","None","None" 310547,1,"Open",3,19356,"Luca Capello",100,"Nobody","2008-01-31 00:03","","2010-07-22 14:53","[git.d.o] /usr/local/bin/git-commit-notice should reflect upstream git-core/contrib/hooks/post-receive-email","/usr/local/bin/git-commit-notice is an old version of upstream git-core/contrib/hooks/post-receive-email. Upstream advises to have the local script a symlink to the upstream file in /usr/share/doc/. If this solution is not feasible, I'd like the local script to be updated every time a new git-core version is installed. Another point is that the local script contains some patches that IMO should be submitted upstream. Since I'm working on the script (see bugs #463316 [1] and #463336 [2]), I can do it, at least for the hooks.bcc and hooks.replyto options [3]. However, to give credits to the patch creators, I'd like to know who they are. [1] http://bugs.debian.org/463316 [2] http://bugs.debian.org/463336 [3] the hooks.cia-project patch requires git-core/contrib/ciabot.pl, which is not (yet) included in the Debian git-core package ","None","None","None","None" 310821,1,"Open",3,1258,"Raphaël Hertzog",100,"Nobody","2008-05-19 09:21","","2008-05-19 09:21","Update page editsshkeys to indicate DSA keys are forbidden as are SSHv1 keys","From: Ben Finney Subject: Re: Alioth and SSH: restored To: debian-devel@lists.debian.org Date: Sat, 17 May 2008 11:42:55 +1000 Roland Mas writes: > - Keys submitted through the web interface are now filtered, and only > RSA keys end up in your authorized_keys file. Don't even try > putting DSA keys in your authorized_keys2 file, the use of that file > has been disabled (and it'll be deleted anyway). The text of still reads: ==== To generate a public key, run the program 'ssh-keygen' (you can use both protocol 1 or 2). The public key will be placed at '~/.ssh/identity.pub' (protocole 1) and '~/.ssh/id_dsa.pub' or '~/.ssh/id_rsa.pub' (protocole 2). Read the ssh documentation for further information on sharing keys. ==== Please update this page to match the set of acceptable key types as per the announcement. ","GForge/FusionForge","None","None","None" 311421,1,"Open",3,11936,"David Paleino",100,"Nobody","2009-01-30 09:56","","2009-01-30 09:56","Survey graphs not rendered","Hello, when trying to see survey graphs, they don't show up. This is the ""Results"" link (the only one working): http://alioth.debian.org/survey/admin/show_results.php?group_id=100114&survey_id=27 Both of these do not work, and only show the options ranking (i.e. no images are rendered): http://alioth.debian.org/survey/admin/show_results.php?graph=yes&group_id=100114&survey_id=27 http://alioth.debian.org/survey/admin/show_results.php?graph=yes&show_comment=yes&group_id=100114&survey_id=27 Kindly, David","GForge/FusionForge","None","None","None" 311629,1,"Open",3,11483,"Lionel Elie Mamane",2203,"Roland Mas","2009-04-28 19:24","","2009-04-28 20:11","monitored bugs do not appear in ""monitored items"" on ""my page""","I'm monitoring issue / support request / bug number / ... #311612 of site-admin. But when I go to https://alioth.debian.org/my/ and click the ""monitored items"" tab, it does not appear. That tab has only ""Monitored Forums"" and ""Monitored FileModules"". It should really have a ""Monitored tracker items"" (could also be called ""Monitored support requests"" or ""Monitoried bug reports"" or something like that).","GForge/FusionForge","None","Accepted","Need upstream change" 311634,1,"Open",3,205174,"Giridhar Appaji Nag Yasa",100,"Nobody","2009-04-29 05:08","","2009-04-29 05:08","Doesn't honour First/Last Name from account info while displaying name","Even though I have a custom setting for my First Name / Last Name, the Name displayed in various project pages and trackers is the name imported from db.debian.org","GForge/FusionForge","None","None","None" 311758,1,"Open",3,19051,"Daniel Nanz",100,"Nobody","2009-06-17 19:19","","2009-06-17 19:19","Been hit by a ""Fusion Forge"" problem?","I cannot access the program submission site of the benchmark game (blank page, (https://alioth.debian.org/tracker/?atid=411646&group_id=30402&func=browse) (""HTTP 500 internal server error"") ) and Isaac suggested to post a comment here and ask for a reset of my stored preferences. Thanks in advance. Daniel Nanz","None","None","None","None" 311760,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2009-06-18 02:05","","2009-06-18 02:05","Tracker page shows 1 open tracker item - but detail shows No items found?","Tracker page, correctly shows 1 open tracker item (of 175) in Bugs https://alioth.debian.org/tracker/?group_id=30402 But Bugs tracker pages shows ""No items found"" - there should be an open tracker item in bugs! https://alioth.debian.org/tracker/?atid=411002&group_id=30402&func=browse","None","None","None","None" 311766,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2009-06-20 23:30","","2009-06-20 23:30","New Tracker doesn't show in ""Data Type"" selection list of other trackers","I created a new tracker - Play - to try and work around the problems like #311596 and #311758 by manually moving a couple of hundred tracker items from ""Play the Benchmarks Game"" tracker to the new tracker. But tracker items in the ""Play the Benchmarks Game"" tracker don't show the new tracker ""Play"" in the ""Data Type"" selection list!","GForge/FusionForge","None","None","None" 311791,1,"Open",3,12198,"Frans Pop",100,"Nobody","2009-06-29 13:48","","2009-06-29 13:48","svnadmin dump/load extremely slow","I've decided to file a support request for this as I'm not normally on IRC currently. Early June I prepared a cleanup operation for the D-I subversion repository that involves a dump + load of the repository database + some manipulations of certain revisions. When I did these preparations (on 3, 4 and 5 June) I could do a database dump + load within something like an hour. When I tried to do the cleanup for real this morning the I/O was so slow that the same dump + load would have taken several *days* to complete. Because of that I've had to abort the planned cleanup. I hope you will be able to resolve this serious performance issue and bring alioth back up to speed again. Please let me know if you'd like me to try again to see if speed is back what it was at the beginning of the month. Thanks, FJP ","None","None","None","None" 311802,1,"Open",4,1258,"Raphaël Hertzog",2203,"Roland Mas","2009-07-03 14:20","","2009-07-03 14:20","Accept restrictions on SSH keys in editsshkeys.php","I asked Rhonda to put the restriction on the SSH key of the debwww-guest account: no-port-forwarding,no-X11-forwarding,no-agent-forwarding,no-pty,from=""194.109.137.218,::ffff:194.109.137.218"",command=""cvs server"" ssh-rsa ... But he was unable to add it via the web interface. Gforge complains about bad format of the key. Roland, can you fix that ?","GForge/FusionForge","None","None","None" 311882,1,"Open",3,17417,"Piotr Ożarowski",100,"Nobody","2009-08-13 17:45","","2009-08-13 17:45","please include all admins in To/Cc field while sending mails to administrators","When a user requests to join a team, a mail is sent to all administrators. Please include all admins in To or Cc field so that when one of them will want to notify others about his actions, he can use ""reply to all"" function in his MUA. Right now every administrator is receiving a mail with his own email only in To field. PS including requester's email somewhere in mail body would be nice as well. ","GForge/FusionForge","None","None","None" 311888,1,"Open",3,12198,"Frans Pop",100,"Nobody","2009-08-20 08:58","","2009-08-20 08:58","Commands for SVN access use cvs.alioth.debian.org instead of svn.alioth.debian.org","The SCM page for projects using subversion currently shows: Anonymous Subversion Access This project's SVN repository can be checked out through anonymous access with the following command(s). svn checkout svn://cvs.alioth.debian.org//svn/debmirror Developer Subversion Access via SSH Only project developers can access the SVN tree via this method. SSH must be installed on your client machine. Substitute developername with the proper values. Enter your site password when prompted. svn checkout svn+ssh://developername@cvs.alioth.debian.org//svn/debmirror It would be nicer if it would use the svn.alioth.debian.org host name. Also note the double slash in the URL for Developer access. Cheers, FJP ","None","None","None","None" 311978,1,"Open",3,209551,"ian martins",100,"Nobody","2009-09-25 15:03","","2009-09-25 15:03","can't post to forum","I created an account yesterday. When I try to post to a forum, I get the message: Open transaction detected!!! ","None","None","None","None" 312152,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2009-12-12 06:50","","2009-12-12 06:50","untrusted Security Certificate","It's a problem when I send a URL to a GForge news post and when they try to read the browser tells them the Security Certificate is untrusted. That pretty much stops them looking any further. Anyway why should they need to have a security certificate to read a project news post?","GForge/FusionForge","None","None","None" 312379,1,"Open",3,10603,"Jim Meyering",100,"Nobody","2010-03-01 11:58","","2010-03-01 11:58","mailman archives mangled messages (when git format-patch output is included)","I have noticed what may be long-standing trouble with lists.alioth.d.o's mailman set-up. It elides everything before the ""From "" of an embedded git format-patch style patch. E.g., I sent this, http://lists.alioth.debian.org/pipermail/parted-devel/2010-February/003430.html, but the original had totally different headers and contained 50 lines of body text before the patch you see there. None of that is archived. It used From:, Date:, Subject: from the patch, rather than from the mail I sent. Where I've seen this before, the problem has been fixed by upgrading to a newer version of mailman. It's particularly annoying when the patch is by someone else; the mangling makes it look like that person posted a patch with no commentary other than the (sometimes brief log message), when in fact, I'm the one who posted it, usually along with significant discussion (which was removed). Fixing this particular case is not urgent for me (I'll just use bug-parted@gnu.org rather than parted-devel.a.d.o, going forward), but archiving such mangled posts makes Debian look bad. Regards, Jim","Mailinglists","None","None","None" 312457,1,"Open",3,209314,"Sylvestre Ledru",100,"Nobody","2010-04-12 18:12","","2010-04-12 18:12","Please change the default role on a user request to join the group","Hello, Since the new release, when a new user applies to join a team (For example, Debian Science https://alioth.debian.org/project/admin/users.php?group_id=100159 ), the default Role is set to Admin while I would prefer to be ""Developer"" (like it used to be). Could you put back the previous behavior ? Thanks ","None","None","None","None" 312459,1,"Open",3,209323,"Simon Paillard",100,"Nobody","2010-04-13 19:16","","2010-04-13 19:16","Please add username from request join mails","Hi, When a join request is sent to a project Admin, only the full name is displayed in the mail body only. As sometimes I prefer to get details from the requestor, could you please: - display the alioth username in the body - display the alioth username in the subject (easily filter) - set the reply-to to username@alioth.debian.org See also: [#311882] please include all admins in To/Cc field while sending mails to administrators Thanks for your work ! Simon","GForge/FusionForge","None","None","None" 312460,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2010-04-14 01:34","","2010-04-14 01:34","""ERROR Missing Parameters"" when upload new file (5.0 upgrade?)","Reported in the follow up comments - ""FusionForge keeps saying ""ERROR Missing Parameters"" when I try to upload the new file. "" https://alioth.debian.org/tracker/index.php?func=detail&aid=312456&group_id=30402&atid=413100","GForge/FusionForge","None","None","None" 312504,1,"Open",3,10612,"Isaac Gouy",2203,"Roland Mas","2010-05-19 17:31","","2011-01-14 08:14","newlines ignored in tracker item descriptions and messages making them ridiculously hard to read","Firefox 3.6.3 Ubuntu 9.10 The new 5.0 FusionForge webpages ignore line feeds in tracker item descriptions and messages (and perhaps elsewhere) making them ridiculously hard to read. The previous versions respected newlines. The newlines do show in the email notifications generated by FusionForge - so presumably this is just a problem with the stylesheet or html.","GForge/FusionForge","None","None","None" 312560,1,"Open",3,16861,"David Bruce",100,"Nobody","2010-06-09 23:24","","2010-06-09 23:24","Alioth visitors get scary warnings due to self-signed SSL cert","Hello, I maintain Tux4Kids, and we have our primary download site for TuxMath and Tux Typing here at Alioth. The problem is that Alioth uses certs that are not signed by authorities recognized by most browsers, so people get very alarming-sounding warnings the first time they visit any part of alioth via https:\\, especially if using Firefox or Chrome. In turn, I get emails from panicked would-be users saying ""Tuxmath is infected!!!"", and the like. I could post SHA-1 checksums to help folks verify that they are getting unaltered files, but our target audience won't understand such things. Thanks for any help, and thanks in any event for this great free resource. David Bruce davidstuartbruce@gmail.com","None","None","None","None" 312573,1,"Open",4,1258,"Raphaël Hertzog",100,"Nobody","2010-06-14 13:42","","2010-06-14 13:42","Ensure /srv/cvs.debian.org is backupped","/etc/da-backup/cvs only covers /srv/alioth.debian.org/chroot/cvsroot currently and not /srv/cvs.debian.org/ which should contain the historical CVS repositories taken over from the former DSA managed cvs.debian.org (which was different from cvs.alioth.debian.org). The web interface of cvs.debian.org was initially configured to be exactly like it was on the DSA variant (in the hope to keep all the links working) and it should have contained only the original repositories (and not the cvs.alioth.debian.org ones). The current situation is weird, we have lots of unused repositories that have been created by I don't know what in /srv/cvs.debian.org/cvs/, and all original repositories are symlinks either to ../cvs-OBSOLETE/ for the non-active ones or to the real /srv/alioth.debian.org/chroot/cvsroot for those that are still used (webwml only AFAIK). I guess this all needs some cleanup.","CVS","None","None","None" 312604,1,"Open",3,201137,"Eli Barzilay",100,"Nobody","2010-06-22 04:56","","2010-06-22 04:56","Cannot upload an attachement to an existing ticket","I have submitted a buggy program to the language shootout in https://alioth.debian.org/tracker/?func=detail&atid=413100&aid=312582&group_id=30402 -- and later when I tried to upload a fixed file, the interface would not allow me to do so. When I attached a file that had the same name, I got a response saying: ERROR Missing Parameters and when I used a different name, I got a different error: ERROR: double submit You Attempted To Double-submit this item. Please avoid double-clicking (This is with FF 3.6.3 on Windows.) ","None","None","None","None" 312609,1,"Open",3,209441,"Luca Falavigna",100,"Nobody","2010-06-27 14:31","","2010-06-27 14:31","cgit web interface","git.debian.org is currently powered by gitweb which seems quite slower compared to another good web interface, cgit (http://hjemli.net/git/cgit/). cgit is currently executed on another high-traffic site such as git.gnome.org, and it's definitely faster. Given that svn.debian.org has two interfaces (wsvn and viewsvn), could it be possible to add cgit as an optional interface to git.debian.org?","git","None","None","None" 312630,1,"Open",3,1258,"Raphaël Hertzog",100,"Nobody","2010-07-22 15:03","","2010-07-22 15:03","Setup nagios monitoring","Now that I switched off my Nagios instance, you should really make sure that something is alerting you when a disk in the RAID goes wrong at least.","None","None","None","None" 312670,1,"Open",3,210897,"Timo Lindfors",100,"Nobody","2010-08-20 06:59","","2010-08-20 06:59","""Could Not Get User"" is not very clear error message","I created a new account and entered ""lindi"" as my username. I then got email telling me to confirm my registration. I entered my username and password to the alioth.debian.org verify.php and got back ""Could Not Get User"" I was puzzled. The first thought was that somehow you had not activated my account yet. After googling around I spotted the problem. The account was actually called ""lindi-guest"". I understand the reasoning between the name change. However, could you please change the error message to something more understandable? For example if (!($username ~= /-guest$)) ""Could Not Get User. Either the user does not exist or there was an unspecified error. If you are not a Debian developer and registered an account then make sure you use the ""-guest"" suffix."" The ""lindi-guest"" suffix is mentioned in the email but come on, who reads account registration emails? ;-) ","None","None","None","None" 312710,1,"Open",3,1061,"Yann Dirson",100,"Nobody","2010-09-13 20:16","","2010-09-13 20:16","git-commit-notice won't send notice to CIA if no email address was specified","git-commit-notice provides support for both email and CIA, but CIA is only a second-class citizen: # Check if we've got anyone to send to if [ -z ""$recipients"" ]; then echo >&2 ""*** hooks.mailinglist is not set so no email will be sent"" echo >&2 ""*** for $refname update $oldrev->$newrev"" exit 0 fi The following works instead (currently in use in a copy of git-commit-notice for omaha project): if [ -z ""$recipients$cia_project"" ]; then echo >&2 ""*** none of hooks.mailinglist and hooks.cia-project are set so no notification will be sent"" ","git","None","None","None" 312898,1,"Open",3,211408,"Chris Leick",100,"Nobody","2010-12-26 12:20","","2010-12-26 12:20","new ssl key invalid","In my account, below »My Page« »Account Maintanance«, the box »Command line account information« is missing (see image). I've inserted my public key direct via https://alioth.debian.org/account/editsshkeys.php but it seems, that this key is unknown to Alioth, when I'm trying svn co svn+ssh://svn.debian.org/manuals/trunk/release-notes/ my password dosn't work. (Account grizzly-guest) Regards, Chris","None","None","None","None" 312968,1,"Open",3,16346,"Matthijs Kooijman",100,"Nobody","2011-02-01 11:08","","2011-02-01 11:08","Improper quoting on request-to-join-project-form (and probably others)","I've just submitted a request to join a project on Alioth [1]. In the comment I typed there, I've used a few single quotes. After pressing submit, the request was correctly submitted (according to the message shown). Additionally, the comment I typed was shown in the textarea again, but this time all single quotes were preceded by a backslash. This looks like some overzealous escaping somewhere (magic_quotes_gpc perhaps?). It's probably harmless, but it might be an indication that there is some underlying, more serious problem. (In fact, looking at the FusionForge source code, it seems there is no explicit escaping in request.php, so it might very well be that magic_quotes is indeed turned on. There is also a possibly relevant bug report [1], which seems to be fixed in the wrong way IMHO). Gr. Matthijs [1]: https://alioth.debian.org/project/request.php?group_id=31226 [2]: http://fusionforge.org/tracker/index.php?func=detail&aid=26&group_id=6&atid=105 ","GForge/FusionForge","None","None","None" 312983,1,"Open",3,201466,"Olivier Berger",100,"Nobody","2011-02-08 17:26","","2011-02-08 17:26","Alioth should notify upon addition in a project","Hi. One seems not to be notified when being added to a project after a pending request was accepted by a project admin. Dunno if this is alioth specific or a FusionForge problem. Thanks in advance.","GForge/FusionForge","None","None","None" 313001,1,"Open",3,211660,"Nils Mussdassein",100,"Nobody","2011-02-14 19:59","","2011-02-14 19:59","Comment saving unintuitive","The placing of the save-button for follow ups is very strange. I think it breaks the ""work order"" if you have to scroll up again.","GForge/FusionForge","None","None","None" 313002,1,"Open",3,211660,"Nils Mussdassein",100,"Nobody","2011-02-14 20:01","","2011-02-14 20:01","Comments, preserve newlines","if there is no way for formatting in comments then you really need to preserve newlines...","GForge/FusionForge","None","None","None" 313052,1,"Open",3,1061,"Yann Dirson",100,"Nobody","2011-03-20 21:40","","2011-03-20 21:40","Better support for ""linked tasks"" in trackers","It would be great to be able to add a column showing task link(s) in a tracker list, and to be able to use them as query fields. I am under the impression that the lack of this greatly hinders usefulness of the Tasks system. ","None","None","None","None" 313053,1,"Open",3,1061,"Yann Dirson",100,"Nobody","2011-03-20 21:50","","2011-03-20 21:50","Tracker's ""publicly available"" flag not changeable","User guide for FusionForge 4.8 says the ""update settings"" page of a tracker allows to change the ""publicly available"" flag. I have a tracker [1] that I created private while it was not set up, and would now like to make it public, but it seems I cannot ? [1] https://alioth.debian.org/tracker/?func=browse&group_id=100519&atid=413108 ","GForge/FusionForge","None","None","None" 313076,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-04-08 16:11","","2011-04-08 16:11","Change Email Address confirmation email not being sent?","https://alioth.debian.org/account/change_email.php 1) put new address into ""New Email Address"" field 2) Clicked the ""Send Confirmation to New Address"" button 3) Page changed 4) Checked for email at new address but there's no confirmation email (not even in the spam folder) Went through the same steps again but still no confirmation email? ","None","None","None","None" 313087,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-04-15 22:59","","2011-04-15 22:59","Notification email being sent to completely wrong email address","1) A notification email for ticket [shootout-Play the Benchmarks Game][313086] ya da ya da ya was sent to ""Eissfeldt, Heiko"" and bounced with an out of office reply ""Hallo, ich bin vom 18.04.2011 bis zum 29.04.2011 nicht im Hause. Diese Email wird nicht weitergeleitet."" ""Hello, I is of 18.04.2011 up to 29.04.2011 not in the house. This email is not passed on."" 2) ""Eissfeldt, Heiko"" is in no way associated with ticket [313086] but I did try unsuccessfully to change the email address associated with the owner of the ticket - something seems badly broken.","None","None","None","None" 313114,1,"Open",3,2440,"Noèl Köthe",100,"Nobody","2011-05-10 07:17","","2011-05-10 07:17","please use correct https certificate for lists.alioth.debian.org","Hello, the ssl certificate for lists.alioth.debian.org has the CN ""alioth.debian.org"" so there is a hostname mismatch when using the admin interface for the mailinglists and the browser refuses to connect. Could you change this that the https server of lists.alioth.debian.org serves the correct hostname in the certificate? Thank you. Regards Noèl ","Mailinglists","None","None","None" 313122,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-05-24 01:53","","2011-05-27 14:36","""Forums"" now list old news items as though they were discussions forums?","FusionForge 5.1 1) There are 3 discussion Forums for The Computer Language Benchmarks Game opinion--amp--help help admin 2) Those forums are listed on the Forums page https://alioth.debian.org/forum/?group_id=30402 3) But so are these old news items - they should not be listed as forums. shootout-revived-as-an-alioth-project- new-languages--new-benchmarks new-hardware---amd-sempron-tm---and-intel---pentium---4 etc etc ","GForge/FusionForge","None","None","None" 313126,1,"Open",3,3618,"Jörg Sommer",100,"Nobody","2011-05-24 09:26","","2011-05-24 09:26","Enable mod_userdir","Please enable the Apache module userdir. I would like to publish my private repository at http://alioth.debian.org/~jo-guest/debian/","None","None","None","None" 313139,1,"Open",3,212017,"Olivier Berger",100,"Nobody","2011-05-25 14:39","","2011-06-14 22:37","Project search broken ?","Hi. It seems the project search is broken. Looking for bts-link project, https://alioth.debian.org/search/?type_of_search=soft&group_id=0&words=bts&Search=Search returns nothing. However, https://alioth.debian.org/projects/bts-link is there and should be retrieved :-(","None","None","None","None" 313141,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-05-25 18:24","","2011-05-31 18:43","Updates to /htdocs are not shown on the project webspace","1) wagner.debian.org does not have any project directories in /var/lib/gforge/chroot/home/groups 2) vasks.debian.org does have project directories in /var/lib/gforge/chroot/home/groups 3) I added a file /var/lib/gforge/chroot/home/groups/shootout/htdocs/quicktest.php 4) http://shootout.alioth.debian.org/quicktest.php 5) The requested URL /quicktest.php was not found on this server.","None","None","None","None" 313142,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-05-25 18:37","","2011-05-25 18:37","""Receive Email about Site Updates"" preference on ""Account Maintenance"" tab broken","I've had ""Receive Email about Site Updates (Very low traffic and includes security notices. Highly Recommended.)"" checked for maybe the last 5 years - but I haven't received any email about site updates. Notably I haven't received any email updates from debian-devel-announce or debian-infrastructure-announce","GForge/FusionForge","None","None","None" 313146,1,"Open",3,2136,"Torsten Werner",100,"Nobody","2011-05-27 08:59","","2011-06-19 10:23","please remove the pkg-otrs project","The project has been used for packaging otrs and otrs2 but it is no longer used by the current maintainer. Please remove the project together with the svn repo and the mailing list.","None","None","None","None" 313147,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-05-27 14:46","","2011-05-27 14:46","Posting to ""No moderation"" forum generates approve/reject moderation email","Now, posting to ""No moderation"" forum generates approve/reject moderation email "" Read to this message and approve/reject it at: https://alioth.debian.org/forum/admin/pending.php?action=view_pending&group_id=30402&forum_id=999 By: Georg Bauhaus I might have missed something obvious like a notice about a crash or site overhaul, so please ignore if I'm stating the obvious. For example, on http://shootout.alioth.debian.org/u64q/cpp.php Step 3, each of the Language links (C vs C++ for all the programs) invariably yields the page with ""n-body Java 6 -server #2 program source code"" on it. Example link: http://shootout.alioth.debian.org/u64q/program.php?test=mandelbrot&lang=gpp& amp;id=7 ""","GForge/FusionForge","None","None","None" 313151,1,"Open",3,10612,"Isaac Gouy",100,"Nobody","2011-05-31 18:57","","2011-06-01 19:54","Please enable PHP $HTTP_GET_VARS","1) Most of the benchmarks game website relies on $HTTP_GET_VARS to allow users to select which data they wish to see - that's all broken because afaict the new PHP install does not have $HTTP_GET_VARS enabled. http://shootout.alioth.debian.org/testvars.php?x=1 2) So instead of showing the data the user selected (in this case k-nucleotide) the PHP script shows data that's known to exist (n-body). No $HTTP_GET_VARS is also why all the charts are blank. http://shootout.alioth.debian.org/u32/performance.php?test=knucleotide","None","None","None","None" 313169,1,"Open",3,212017,"Olivier Berger",100,"Nobody","2011-06-11 16:55","","2011-06-16 08:31","Please fix cvs anonymous login (or instructions on alioth)","Reading instructions for checking out webwml from CVS, I see : ""Anonymous CVS Access This project's CVS repository can be checked out through anonymous (pserver) CVS with the following instruction set. The module you wish to check out must be specified as the modulename. When prompted for a password for anonymous, simply press the Enter key. cvs -d :pserver:anonymous@anonscm.debian.org:/webwml login cvs -d :pserver:anonymous@anonscm.debian.org:/webwml checkout modulename "" However, 'cvs -d :pserver:anonymous@anonscm.debian.org:/webwml login' gives : $ cvs -d :pserver:anonymous@anonscm.debian.org:/webwml login Logging in to :pserver:anonymous@anonscm.debian.org:2401/webwml CVS password: cvs [login aborted]: unrecognized auth response from anonscm.debian.org: cvs [pserver aborted]: /webwml: no such repository ... so either the instructions are wrong, or something needs to be fixed for anonymous checkout... Thanks in advance. Best regards,","CVS","None","None","None" 313170,1,"Open",3,212017,"Olivier Berger",100,"Nobody","2011-06-11 16:58","","2011-06-11 16:58","Add pointer to siteadmin on alioth homepage","I'd like to suggest adding a pointer to the siteadmin project (or directly its support tracker) from http://alioth.debian.org/, so that people identify where to report problems. Alternatively (or in addition), maybe a link could be put in the site's tabs (Maybe with the a fusionforge tabs plugin). Thanks in advance. Best regards,","None","None","None","None" 313171,1,"Open",3,212017,"Olivier Berger",100,"Nobody","2011-06-11 17:11","","2011-06-11 17:11","Fix broken CVS web browser behind http://cvs.debian.org/projname/","For instance : http://cvs.debian.org/webwml/?root=webwml gives 404 Thanks in advance.","None","None","None","None" 313188,1,"Open",3,18867,"Robert Clay",100,"Nobody","2011-06-22 11:41","","2011-10-23 22:17","Problems with File Releases","Have attempted to add file releases to the pkg-sql-ledger project, recently specifically releases like ""ledgersmb 1.2.20-1"" and ""ledgersmb 1.2.21-1"". I can get files like the *.dsc or even the *diff.gz added to the release but not the *deb file itself or the *orig.tar.gz. Is there a file size limit set? (There appears to be such a setting that goes in the ini file for FusionForge) If so, what is it and can it be changed to something larger? Note also that I can upload all of the files to the 'incoming' directory for the project but none of the files show up as available when attempting to release a file; I have to browse for the file locally. Also; is there a difference between the ""QRS"" and the ""FRS""? The tool ""FRS"" doesn't appear to be enabled in the project but administering file releases using the ""QRS is available. ","None","None","None","None" 313192,1,"Open",3,2052,"Julien Blache",100,"Nobody","2011-06-27 17:24","","2012-02-22 20:06","Couple issues with newly-created project: git, project home directory","Hi, I've got a few issues with the newly-created forked-daapd project and the git repository: * The git repository isn't listed on git.debian.org * The SCM tab doesn't display any information about the repository and doesn't display the ""Browse repository"" link I've pushed my tree to the newly-created repository on sunday. Is there anything else I was supposed to do? Thanks! JB.","git","None","None","None" 313193,1,"Open",3,14715,"James McCaw",100,"Nobody","2011-06-29 10:42","","2011-06-29 10:42","Please shutdown pkg-sage.alioth.debian.org","Hi Alioth admins I set up pkg-sage in 2007 with the hope of integrating sage into debian. That proved to never get off the ground in this way, as you will see by the total lack of activity (ever!). sage had some presence in debian through another group's initiative some years ago but disappeared again. This site and mailing list are a relic. Please remove all traces on alioth and the alioth mailing lists. There are only a handful of people who ever expressed interest and none of us have ever had a substantive conversation since joining up. Can you please remove my user account jamesm-guest while you are at it. Kind Regards James","None","None","None","None" 313209,1,"Open",3,3003,"Arthur de Jong",100,"Nobody","2011-07-09 19:55","","2011-07-09 19:55","cannot commit to python-modules or python-apps SVN repos","I get the feeling something changed in the repository access for both mentioned repositories. It used to be that you didn't have to be a team member to commit. [0] documents that ""...the repository is writable by all DD"". and [1] ""...the repository is writable by all PMPT members and thus by all DD"". But I can no longer commit in the python-modules, while I could do that in February of this year. Should the documentation be updated or was there some access control thing that was missed? Thanks. Btw, I've requested membership of both teams but [2] suggests that that could take some time or it also has issues. [0] http://python-modules.alioth.debian.org/python-modules-policy.html#joining-the-team [1] http://python-apps.alioth.debian.org/policy.html#joining-the-team [2] http://lists.debian.org/debian-python/2011/06/msg00138.html","SubVersioN","None","None","None" 313213,1,"Open",3,3413,"Helge Kreutzmann ",100,"Nobody","2011-07-17 13:29","","2011-07-17 13:29","Please be more liberal with MIME boundaries","My e-mail provider rewrites the MIME boundaries, unfortunately they are one character to long afterwards. This leads to: UNDELIVERABLE MAIL Your message to the following recipients cannot be delivered: : lists.alioth.debian.org [217.196.43.134]: >>> DATA <<< 550 Broken MIME container (Long MIME Boundary) when trying to send to lists.alioth.debian.org. Would it be possible to relax this check? (In the sense of ""be liberal what to accept, be strict what to send""). lists.debian.org does not have a problem with these kind of e-mails. I tried to contact mailman@lists.alioth.debian.org but the mail is rejected there as well. I could not find a form or a bug tracker on alioth.debian.org directly, therefor I'm reporting it here. Thanks! Greetings Helge ","Mailinglists","None","None","None" 313216,1,"Open",3,964,"Steve McIntyre",100,"Nobody","2011-07-20 15:32","","2011-07-20 15:32","""Projects"" search doesn't seem to work","I've tried searching for ""debian cd"", ""debian-cd"" and ""debian on cd"" but don't get any search results. Ditto ""pkg-cvs"" and ""cvs"".","GForge/FusionForge","None","None","None" 313241,1,"Open",3,205355,"Thomas Koch",100,"Nobody","2011-07-26 09:17","","2011-07-26 09:17","Please auto-generate an authors file for svn to git migrations","Hi, when importing an SVN repo to GIT, you can provide an authors file so that the svn usernames are expanded to clear names and mail addresses. For piuparts this looks like: ana = Ana Beatriz Guerrero López (ana) ana@debian.org filippo = Filippo Giunchedi (filippo) filippo@debian.org h01ger-guest = Holger Levsen (holger) holger@debian.org holger = Holger Levsen (holger) holger@debian.org [SNIP] This file could actually be autogenerated with data from SVN and the alioth database. Maybe this is worth the effort? There are still thousands of SVN repos which will inevitable be migrated to GIT. (Resistence is futile...) ","SubVersioN","None","None","None" 313264,1,"Open",3,10164,"Yuri Kozlov",100,"Nobody","2011-07-30 05:11","","2011-07-30 05:11","l10n-russian: web-browsing svn is different with real svn data repo","Hello. web-svn page https://alioth.debian.org/scm/browser.php?group_id=30279 show the data not from current svn (possible it show the old data?). For example it have no file docs/maint-guide.ru.po (and even directory ""docs""!) ","SubVersioN","None","None","None" 313310,1,"Open",3,211313,"Sebastian Reichel",100,"Nobody","2011-08-21 09:27","","2011-08-21 09:27","please chown me some files from my old -guest account.","please chown me (sre) the following files (they were owned by my deleted sre-guest account): /home/groups/pkg-fso/htdocs/cornucopia.html /home/groups/pkg-fso/htdocs/fso.txt /home/groups/pkg-fso/htdocs/shr.html -- Sebastian","None","None","None","None" 313316,1,"Open",3,12820,"Josh Triplett",100,"Nobody","2011-08-24 21:42","","2011-08-24 21:42","https does not work on lists.alioth.debian.org (certificate only valid for alioth.debian.org)","https://lists.alioth.debian.org/ produces a certificate mismatch error, because it uses a certificate only valid for alioth.debian.org.","None","None","None","None" 313318,1,"Open",3,201832,"Charles Plessy",100,"Nobody","2011-08-27 01:30","","2011-08-27 01:30","Please give write permission to the Debian ACL group on the dep Subversion repository.","Dear Alioth admins, Please give write permission to the Debian ACL group on the dep Subversion repository. I did not manage to set it up by myself through the web admin interface, as it leads to a white page, with no change on the ACLs. Have a nice day, -- Charles Plessy Tsurumi, Kanagawa, Japan","SubVersioN","None","None","None" 313342,1,"Open",3,215182,"Gary Wright",100,"Nobody","2011-09-18 21:10","","2011-09-18 21:10","anonscm.debian.org IO error - intermittent","Error Summary: OperationalError: disk I/O error Error URL: http://anonscm.debian.org/loggerhead/pkg-cups/cups/debian-trunk/revision/1000 Error Detail: search: RSS. Changes; Files. (root)/pkg-cups/cups/debian-trunk : error. An unexpected error occurred whileprocessing the request: OperationalError: disk I/O error. Loggerhead 1.17 is a web-based inter If there was a Category for 'anonscm' or 'web source browsing' then I would have selected that, but wasn't sure which category otherwise.","None","None","None","None" 313366,1,"Open",3,210897,"Timo Lindfors",100,"Nobody","2011-09-28 08:39","","2011-09-28 08:39","UnicodeDecodeError when trying to view some files in SVN","Steps to reproduce: 1) http://anonscm.debian.org/viewvc/pkg-glibc/glibc-package/trunk/debian/patches/all/ 2) click ""4811"" on the line that reads local-alias-UTF-8.diff Expected results: 2) contents of local-alias-UTF-8.diff is shown Actual results: 2) An Exception Has Occurred Python Traceback Traceback (most recent call last): File ""/usr/lib/viewvc/lib/viewvc.py"", line 4317, in main request.run_viewvc() File ""/usr/lib/viewvc/lib/viewvc.py"", line 397, in run_viewvc self.view_func(self) File ""/usr/lib/viewvc/lib/viewvc.py"", line 1763, in view_markup markup_or_annotate(request, 0) File ""/usr/lib/viewvc/lib/viewvc.py"", line 1696, in markup_or_annotate path[-1], mime_type) File ""/usr/lib/viewvc/lib/viewvc.py"", line 1589, in markup_stream_pygments encoding='utf-8'), ps) File ""/usr/lib/pymodules/python2.6/pygments/__init__.py"", line 86, in highlight return format(lex(code, lexer), formatter, outfile) File ""/usr/lib/pymodules/python2.6/pygments/__init__.py"", line 45, in lex return lexer.get_tokens(code) File ""/usr/lib/pymodules/python2.6/pygments/lexer.py"", line 137, in get_tokens text = text.decode('utf-8') File ""/usr/lib/python2.6/encodings/utf_8.py"", line 16, in decode return codecs.utf_8_decode(input, errors, True) UnicodeDecodeError: 'utf8' codec can't decode byte 0xe5 in position 242: invalid continuation byte ","SubVersioN","None","None","None" 313370,1,"Open",3,18867,"Robert Clay",100,"Nobody","2011-09-28 21:59","","2011-10-23 22:19","Files uploaded for release are not visable","We have multiple files uploaded to the pkg-sql-ledger project incoming directory, but none are showing up as being already available on the Quick Release Page so none of them can be selected to be released. ","GForge/FusionForge","None","None","None" 313376,1,"Open",3,10572,"Charles Lepple",100,"Nobody","2011-09-30 10:41","","2011-09-30 10:41","IP address for lists.alioth.debian.org listed on dnsbl.sorbs.net; some mailing list traffic is bouncing","A number of outgoing mailing list messages are bouncing with errors such as the following: 554 5.7.1 Service unavailable; Client host [217.196.43.132] blocked using dnsbl.sorbs.net; Currently Sending Spam See: http://www.sorbs.net/lookup.shtml?217.196.43.132 I would rather not debate the merits of other mail servers using a single blacklist to block email; however, several of them seem to be using this blacklist, so it might be good to investigate this before it gets out of hand.","Mailinglists","None","None","None" 313382,1,"Open",3,1140,"Javier Fernandez-Sanguino Pen~a",100,"Nobody","2011-10-03 23:42","","2011-10-03 23:42","Subscription to mailing lists from SPAM domain","Hi, Reviewing some of the mailing lists I administer and have neglected for some time I've noticed that, in many of them had a number of subscriptors from the 'apotmail.com' domain. For example: Dacia.hale@apotmail.com, Kori.oconnor@apotmail.com and Mirtha.mills@apotmail.com. Some of these lists were largely unused and were catching only spam. Which is an indication that these subscriptions are bogus and have been made either to send spam or to programatically retrieve the list of subscriptors to the mailing list (and harvest email addresses) Googling I've found that: a) This domain seems to be related to SPAM b) This behaviour has been detected in other mailing lists. For reference: http://linuxmafia.com/pipermail/conspire/2011-June/006298.html http://www.mail-archive.com/mailman-users@python.org/msg59525.html http://opensolaris.org/jive/thread.jspa?threadID=140522 I would like to suggest Alioth admins to fully block this domain from sending to the mailing lists as well as from subscribing, and e-mails from this domain should be automatically removed from the subscriptors lists to all of Alioth mailing lists. Regards Javier ","Mailinglists","None","None","None" 313438,1,"Open",3,205163,"Julien Jehannet",100,"Nobody","2011-11-05 03:22","","2011-11-05 03:22","request for new mercurial repository for ""libjs-mathjax"" project","Hello, I would like to migrate the packaging files of the upcoming libjs-mathjax package [#627518] to Debian infrastructure. I suppose the repo url could be: http://anonscm.debian.org/hg/collab-maint/libjs-mathjax At the moment, I use a personal repository on bitbucket [1] but I would change VCS fields with correct values. [1] http://bitbucket.org/juj/debian-libjs-mathjax Best regards,","Mercurial/hg","None","None","None" 313451,1,"Open",3,11516,"Daniel Leidert",100,"Nobody","2011-11-23 18:29","","2012-06-12 09:36","anonscm pointing to CVS instead of SVN repository","Hi, I'm one of the admins of the debian-xml-sgml project. In the past we used CVS. Now most packages are maintained via subversion. The project site has been set to point to the subversion repository a long time ago. But the anonscm service now points to the CVS repository, making all ""browse"" links in the PTS lead to a 404 HTML error. See e.g. package docbook-xsl: http://packages.qa.debian.org/d/docbook-xsl.html http://anonscm.debian.org/viewvc/debian-xml-sgml/packages/docbook-xsl/trunk/ How can this be fixed? Regards, Daniel","SubVersioN","None","None","None" 313482,1,"Open",3,2572,"Roger Leigh",2203,"Roland Mas","2011-12-28 22:45","","2012-01-09 14:07","Please remove uterm project","Hi, I'm the sole member of the uterm project, a project which never took off and which has been effectively abandoned for many years. Please could you remove the project in its entirely? All I get is admin messages about spam from the mailing lists, so ideally I'd like them removed entirely--there's nothing useful in there to preserve. The same applies to the VCS repo, which I have a local backup of. Thanks, Roger","None","None","Fixed","None" 313485,1,"Open",3,218543,"Daisuke Higuchi",100,"Nobody","2012-01-02 14:57","","2012-01-02 14:57","please remove my ""dai-guest"" account","Dear Alioth Admin, please remove my ""dai-guest"" account. now i use my ""dai"" account. Regards, dai","None","None","None","None" 313486,1,"Open",3,203816,"Angel Abad Contreras",100,"Nobody","2012-01-03 00:30","","2012-01-03 00:30","Please remove angelabad-guest","Hi, now Im Debian Developer (angel), so please remove my guest account. - angelabad-guest Thanks in advance!","None","None","None","None" 313488,1,"Open",3,218546,"Francesco Namuri",100,"Nobody","2012-01-03 07:47","","2012-01-03 07:47","remove old -guest account","Hi, I'm Francesco Namuri, I become a DD in past days, please, can you delete my old -guest account? It's francesco-guest. Thank you. Ciao, francesco","None","None","None","None" 313513,1,"Open",3,215295,"Leo Snakeman",100,"Nobody","2012-01-16 05:14","","2012-01-16 05:14","account removal","please remove my account vrgr-guest it is no longer needed thankyou","None","None","None","None" 313535,1,"Open",3,210081,"Axel Beckert",100,"Nobody","2012-02-08 12:59","","2012-02-08 12:59","Please allow blame view in gitweb","http://anonscm.debian.org/gitweb/?p=aptitude/aptitude.git;a=blame;f=debian/changelog;hb=refs/heads/debian says ""403 - Blame view not allowed"". Is there any reason why this has been disabled? IMHO that's hindering using gitweb as development helper a lot.","git","None","None","None" 313550,1,"Open",3,209216,"Jonathan Nieder",100,"Nobody","2012-02-22 20:46","","2012-02-26 16:18","Please add SRV record for git.debian.org pointing to wagner","Hi, /etc/inetd.conf on vasks sayeth: # proxy those to wagner. :-/ -- 2011-05-24 tfheen. # we should disable this once stable has git and svn with proxy support git stream tcp nowait.400 nobody /usr/sbin/tcpd /bin/nc -q0 wagner.debian.org git svn stream tcp nowait.400 nobody /usr/sbin/tcpd /bin/nc -q0 wagner.debian.org svn Git in wheezy has had support for SRV records for a while, but for lack of real-world testing we haven't pursued inclusion upstream aggressively. I imagine you can see where I'm going. :) Please consider adding a SRV record for _git._tcp.git.debian.org. A single record with weight 0 pointing to wagner.debian.org should do the trick, though if you want to go wild with the client-side failover and load balancing features, that should work, too. For the sake of clients using versions of git without this feature, the proxying in inetd.conf would still be needed. See http://lists.debian.org/debian-devel/2011/05/msg00942.html for context. Thoughts? Jonathan","git","None","None","None" 313588,1,"Open",3,212764,"Antonio Terceiro",100,"Nobody","2012-03-28 10:10","","2012-03-28 10:10","list info link in empty archive HTML page is broken","When you first create a list, the HTML in the list archives points to the wrong place. The HTML for an empty list archive contains a link that looks like this: http://lists.alioth.debian.org/mailmanlistinfo/debian-br-gud-ce There should be an extra slash separating ""mailman"" from ""listinfo"", i.e. the link should be http://lists.alioth.debian.org/mailman/listinfo/debian-br-gud-ce After the first message is posted, the generated HTML contains correct links. I am not sure whether this is a problem in the mailman codebase or with the mailman setup on alioth.","Mailinglists","None","None","None" 313604,1,"Open",3,221875,"Alessandro Ghedini",100,"Nobody","2012-04-10 19:34","","2012-04-10 19:34","Please remove 'ghedo-guest' account","Hi, my old 'ghedo-guest' account can be removed, since I've already migrated all my project memberships to the new 'ghedo' account. Cheers","None","None","None","None" 313625,1,"Open",3,223741,"Loni Nix",100,"Nobody","2012-05-10 21:11","","2012-05-10 21:11","Please remove the lornix-guest account","Thought I'd found a bug, further work isolating it to smallest reproducible code allowed me to determine it was my fault. No longer need/want account, since not posting a bug. This should be easier to do. Don't need another (IMO) junk email source. Thank you Loni Nix lornix@lornix.com 'lornix-guest', id# 223741 ","None","None","None","None" 313653,1,"Open",3,224191,"Xavier Guimard",100,"Nobody","2012-05-25 04:22","","2012-05-25 04:22","Remove ""-guest""","Hi, I'm DM and I'd like to remove ""-guest"" from my alioth account (xguimard-guest). Is it possible ? Best regards, Xavier (x.guimard@free.fr) ","None","None","None","None" 313668,1,"Open",3,222393,"Tatsuki Sugiura",100,"Nobody","2012-05-31 20:31","","2012-05-31 20:31","can't login with ssh for git","Hello, I have join a group as a develop member and registered my ssh key. But I cannot login git.debian.org via ssh. sugi@tempest:~% ssh git.debian.org Permission denied (publickey). I need r/w access for group repository to push my package files. How do I check next?","git","None","None","None" 313669,1,"Open",3,199062,"Matthias Albert",100,"Nobody","2012-06-04 20:06","","2012-06-04 20:06","Delete project pkg-glusterfs","Hi all, could you please delete the project ""pkg-glusterfs"" because it isn't needed anymore? Cheers, Matthias","None","None","None","None" 313672,1,"Open",3,204060,"Pierre-Alexandre Voye",100,"Nobody","2012-06-07 08:18","","2012-06-07 08:18","Lisaac's project mailing list taken by spammers","Hi, i'm an administrator of Lisaac's project, which is now a dead project. Our Mailing list, lisaac-devel ( http://lists.alioth.debian.org/cgi-bin/mailman/admin/lisaac-devel ), lisaac-announce ( http://lists.alioth.debian.org/cgi-bin/mailman/admin/lisaac-announce/ ) , lisaac-commits ( http://lists.alioth.debian.org/cgi-bin/mailman/admin/lisaac-commits ) are taken by spammers. The passwords, which were SHA1 style password have changed. I would like to know if it is possible to __remove__ these mailing lists. Thank you","Mailinglists","None","None","None" 313676,1,"Open",3,211534,"Mike Gabriel",100,"Nobody","2012-06-11 10:58","","2012-06-11 10:58","Debian Edu Git namespace -> allow rw-access for all DDs","Hi, on behalf of the Debian Edu project I would like to ask for the possibility to give all DDs rw-access to our new Git repository namespace vasks:/git/debian-edu Andreas Tille reported some similar enhancement for the Debian Med project and we would love to have that in Debian Edu, as well. Thanks, Mike","git","None","None","None" 313685,1,"Open",3,225091,"grupo gps",100,"Nobody","2012-06-21 07:42","","2012-06-21 07:42","teste","teste","Mercurial/hg","None","None","None" 313691,1,"Open",3,12830,"Vince McIntyre",100,"Nobody","2012-06-29 00:07","","2012-06-29 00:07","unhelpful handling of older VCS browse links (op=log)","Originally submitted this as #679349. They redirected me here. > The hplip package source has this: >  Vcs-Browser: http://svn.debian.org/wsvn/pkg-hpijs/hplip/?op=log > The (browse) link in the packages.qa.d.o page [1] is the same URL. > > Following that link gives this result: >  An Exception Has Occurred > >  An illegal parameter name was provided. >  HTTP Response Status > >  400 Bad Request > > Expected results: >  server tries a redirect to http://svn.debian.org/wsvn/pkg-hpijs/hplip/ This issue is best fixed on alioth, since that is where the problem was introduced when they migrated from wsvn to viewvc. Please contact them about adding a redirect stripping ?op=log from URLs: Hope you can help. Thank you.","None","None","None","None" 313713,1,"Open",3,209311,"Andrew Lee",100,"Nobody","2012-07-08 22:49","","2012-07-08 22:49","Request of removal pkg-lxde project.","Dear alioth admin, Please remove pkg-lxde project since we moved it to upstream. We have backup everything, so that you can remove all data of it. Thanks, -Andrew","None","None","None","None" 313732,1,"Open",3,204121,"Per Carlson",100,"Nobody","2012-07-28 10:34","","2012-07-28 10:34","Removal of account","Hi. Please remove my account percarlson-guest from Alioth. TIA, Per","None","None","None","None" 313735,1,"Open",3,205355,"Thomas Koch",100,"Nobody","2012-08-06 08:45","","2012-08-06 08:45","please install tmux, tree on alioth.debian.org","please: aptitude install tmux tree ","None","None","None","None" 313742,1,"Open",3,215306,"Cédric Pineau",100,"Nobody","2012-08-13 20:07","","2012-08-13 20:07","Request the removal of cpineau-guest"," I mistakely created two accounts. The one I use is cedricpineau-guest. (Both refer to my email cedric.pineau@gmail.com) Thanks","None","None","None","None" 313756,1,"Open",3,2335,"Marc Haber",100,"Nobody","2012-08-28 14:18","","2012-08-28 14:18","please consider installing tig on vasks","Hi, please consider installing tig, a ncurses based git repository browser, on vasks, so that people can check whether they have done the right thing with their repo. Greetings Marc ","git","None","None","None" 313805,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:30","","2012-09-20 19:30","Please remove pkg-bmv project","This package got removed from Debian some time ago, there's no need for it any longer. thanks, guillem","None","None","None","None" 313806,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:32","","2012-09-20 19:32","Please remove pkg-ofbis project","This package got removed from Debian long time ago, there's no need for it any longer. thanks, guillem","None","None","None","None" 313807,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:35","","2012-09-20 19:35","Please remove pkg-ufsutils project","This project got merged into the glibc-bsd project, so there's no need for it any longer. thanks, guillem","None","None","None","None" 313808,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:37","","2012-09-20 19:37","Please remove pkg-ppmd project","I moved the git repositories somewhere else long time ago, there's no need for this project any longer. thanks, guillem","None","None","None","None" 313809,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:40","","2012-09-20 19:40","Please remove pkg-unace project","I moved the git repositories somewhere else long time ago, there's no need for this project any longer. thanks. guillem","None","None","None","None" 313810,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:41","","2012-09-20 19:41","Please remove pkg-arj project","I moved the git repositories somewhere else long time ago, there's no need for this project any longer. thanks, guillem","None","None","None","None" 313811,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:42","","2012-09-20 19:42","Please remove pkg-fbset project","I moved the git repository somewhere else long time ago, there's no need for this project any longer. thanks, guillem","None","None","None","None" 313812,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:46","","2012-09-20 19:46","Please remove pkg-xfstt project","I moved the git repository somewhere else long time ago, there's no need for this project any longer. thanks, guillem","None","None","None","None" 313813,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:47","","2012-09-20 19:47","Please remove pkg-device3dfx project","I moved the git repository elsewhere long time ago, there's no need for this project any longer. thanks, guillem","None","None","None","None" 313814,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-09-20 19:49","","2012-09-20 19:49","Please remove pkg-glide project","I moved the git repository somewhere else long time ago, there's no need for this project any longer. thanks, guillem","None","None","None","None" 313821,1,"Open",3,207956,"Sébastien Villemot",100,"Nobody","2012-09-25 19:17","","2012-09-25 19:17","Please remove the sebastien-guest account","I have become a DD (login: sebastien), so my old guest account (login: sebastien-guest) can now be removed. Thanks, ","GForge/FusionForge","None","None","None" 313822,1,"Open",3,1357,"Konstantinos Margaritis",100,"Nobody","2012-09-26 08:55","","2012-09-26 08:55","please remove projects sumusu and pegasos.","These projects are unused and obsolete since a long time, I'm cleaning up my alioth account. Please remove all connected resources to these projects. (lists, etc). Thanks Konstantinos","GForge/FusionForge","None","None","None" 313823,1,"Open",3,1357,"Konstantinos Margaritis",100,"Nobody","2012-09-26 08:56","","2012-09-26 08:57","""Debian group Debian"" -> permission denied.","While I seem to be part of the group, I get a permission denied when I try to access the project page.","GForge/FusionForge","None","None","None" 313824,1,"Open",3,1357,"Konstantinos Margaritis",100,"Nobody","2012-09-26 08:58","","2012-09-26 08:58","projects: ACE+TAO and Freefonts, not an admin anymore","Please remove me from the projects' admin list. Despite being listed as a project admin for those, I get a permission denied when I try to access the projects' pages.","GForge/FusionForge","None","None","None" 313825,1,"Open",3,1357,"Konstantinos Margaritis",100,"Nobody","2012-09-26 09:00","","2012-09-26 09:00","3 Freefont-devel and 86 Pkg-ace-commits moderator request(s) waiting","I'm not a list admin for those projects anymore and I've been getting those emails for a while. Please remove me from those lists -right now I cannot even remove myself from those projects let alone moderate the lists.","Mailinglists","None","None","None" 313826,1,"Open",3,1357,"Konstantinos Margaritis",100,"Nobody","2012-09-26 09:24","","2012-09-26 09:24","support request 302375 inaccessible","This one is ancient (since 2006) and I cannot cancel/remove it.","GForge/FusionForge","None","None","None" 313828,1,"Open",3,209754,"Janos Guljas",100,"Nobody","2012-09-26 21:37","","2012-09-26 21:37","Remove janos-guest account","Hi, Could you please remove janos-guest account, as it is not needed anymore. Thanks, Janos","GForge/FusionForge","None","None","None" 313850,1,"Open",3,2556,"Petter Reinholdtsen",100,"Nobody","2012-10-06 09:03","","2012-11-22 06:47","Script break after automatically getting suid bit set","The commit script is broken for the spell-norwegian project because the perl script get the suid bit set automatically. This is how it fail: pere@minerva:~/src/spell-norwegian-cvs/src/spell-norwegian$ cvs commit -m ""Remove duplicate entries after fixing the handling of tripple consonants."" norsk.words /cvs/spell-norwegian/src/spell-norwegian/norsk.words,v <-- norsk.words new revision: 1.88; previous revision: 1.87 Can't do setuid (cannot exec sperl) pere@minerva:~/src/spell-norwegian-cvs/src/spell-norwegian$ The problem is the log_accum.pl script. When I remove the setgid bit, shortly thereafter it is automatically reinserted: pere@minerva:~/src/spell-norwegian-cvs/src/spell-norwegian$ ssh \ cvs.debian.org ls -la /cvs/spell-norwegian/CVSROOT/log_accum.pl -r-xrwsr-x+ 1 pere scm_spell-norwegian 18088 Sep 29 05:54 /cvs/spell-norwegian/CVSROOT/log_accum.pl pere@minerva:~/src/spell-norwegian-cvs/src/spell-norwegian$ Can you fix whatever cron job that is setting the setgid bit to stop doing it on non-directories? ","CVS","None","None","None" 313897,1,"Open",3,210683,"Nicolas Boulenguez",100,"Nobody","2012-11-12 22:59","","2012-11-12 23:16","Please remove the nicobou-guest account.","I should be able to connect with my new DD account now. Thanks. ","None","None","None","None" 313898,1,"Open",3,10572,"Charles Lepple",100,"Nobody","2012-11-14 13:26","","2012-11-14 13:26","error message while trying to edit public HTML page in Mailman","I get the following error message when trying to update a URL in the public HTML page for the nut-upsuser list: ""Bug in Mailman version 2.1.13 We're sorry, we hit a bug! Please inform the webmaster for this site of this problem. Printing of traceback and other system information has been explicitly inhibited, but the webmaster can find this information in the Mailman error logs. "" The error occurred just before Wed Nov 14 13:16:57 UTC 2012.","Mailinglists","None","None","None" 313899,1,"Open",3,237055,"Nathaniel Harrison Handler",100,"Nobody","2012-11-15 22:35","","2012-11-15 22:35","Remove nhandler-guest Account","Hello, I have just become a Debian Developer, so I no longer need my old nhandler-guest account. Could you please remove it at your earliest convenience? Thanks, Nathan Handler (nhandler)A","None","None","None","None" 313900,1,"Open",3,211962,"Sebastian Ramacher",100,"Nobody","2012-11-15 23:43","","2012-11-15 23:43","Please remove my old account","Hi, I've just got my new account (sramacher), so please remove my old one (sramacher-guest). Thanks","None","None","None","None" 313911,1,"Open",3,2570,"Guillem Jover",100,"Nobody","2012-11-21 10:18","","2013-04-19 23:12","Unable to send mails to alioth.debian.org from my ISP","Hi! I'm unable to send any mail to alioth.debian.org (including users.a.d.o and lists.a.d.o), from my ISP (ono.com), the error message bounced is not much helpful. It could be a local problem of mine, but this is the only site that fails for me, so I doubt it; I could also suspect maybe a RBL issue, but in that case blacklisting an entire ISP seems pretty harsh, moreover when the main debian.org mail handling does not do that, but maybe it's something else entirely. Here's a sample error message I get bounced: These recipients of your message have been processed by the mail server: selinux-devel@lists.alioth.debian.org; Failed; 5.4.0 (other or undefined network or routing status) I could bounce the error mail to someone, if need be. Thanks, Guillem","Mailinglists","None","None","None" 313956,1,"Open",3,237051,"Daniel Pocock",100,"Nobody","2013-01-07 22:45","","2013-01-07 22:45","remove dpocock-guest (replaced by pocock)"," Hi, I am now logging in as pocock as a DD Therefore, please remove my old account dpocock-guest If any files remain with the old user, please transfer them to the new user, or let me know if there is a tool or checklist I should use to migrate anything myself Regards, Daniel","None","None","None","None" 313983,1,"Open",3,237051,"Daniel Pocock",100,"Nobody","2013-01-19 20:25","","2013-01-19 20:25","pkg-auth and pkg-monitoring not in gitweb"," I've migrated some repos from collab-maint to pkg-auth and pkg-monitoring I notice none of them show up here though: http://anonscm.debian.org/gitweb/ and manually entering URLs for them doesn't work either Are any extra steps needed to have team repos added to the gitweb config?","git","None","None","None" 314029,1,"Open",3,237051,"Daniel Pocock",100,"Nobody","2013-02-23 21:52","","2013-02-23 21:52","scm_pkg-javascript group error"," I've recently been added to pkg-javascript I see other team members are in this group: 150128(scm_pkg-javascript) but I am not in the UNIX group: pocock@vasks:~$ id uid=257051(pocock) gid=257051(pocock) groups=257051(pocock),10800(Debian),40333(pkg-voip),40975(debconf-data),40976(debconf-team),41094(pkg-multimedia),50800(scm_Debian),80333(scm_pkg-voip),80975(scm_debconf-data),80976(scm_debconf-team),81094(scm_pkg-multimedia),110791(pkg-monitoring),110804(debian-sponsors),110821(pkg-auth),150791(scm_pkg-monitoring),150804(scm_debian-sponsors),150821(scm_pkg-auth) pocock@vasks:/git/pkg-javascript$ ./setup-repository sipml5 'WebRTC (JavaScript) SIP library and client' mkdir: cannot create directory `sipml5.git': Permission denied pocock@vasks:/git/pkg-javascript$ ls -ld . drwxrwsr-x+ 52 root scm_pkg-javascript 4096 Nov 24 19:37 . Can somebody please add me to scm_pkg-javascript ? ","git","None","None","None" 314032,1,"Open",3,2382,"Christian Perrier",100,"Nobody","2013-02-27 05:58","","2013-02-27 05:58","Need to restore someone active to administer the aptitude project","Hello, The ""aptitude"" project on Alioth was created by Daniel Burrows while he was the main developer of aptitude. For quite a while now, Daniel has been inactive and aptitude development has been taken over by Daniel Hartwig, with the help of Axel Beckert and myself. It would help if one of us could be given admin rights to the aptitude project so that we can administer it (for instance, we would like to put the aptitude docs online). TIA","GForge/FusionForge","None","None","None" 314034,1,"Open",3,237507,"Gert Wollny",100,"Nobody","2013-02-27 16:18","","2013-02-27 16:18","Please remove my old account ""gerddie-guest""","The accound is gerddie-guest Gert Wollny and I don't have access anymore to the email I registered it with. Many thanks. Gert ","None","None","None","None" 314058,1,"Open",3,237051,"Daniel Pocock",100,"Nobody","2013-03-08 12:18","","2013-03-08 12:18","group mismatch"," Hi, I was recently added to pkg-xen I notice that I've got the group pkg-xen but the repository is owned by scm_pkg-xen Can you please add me to all necessary groups for the team, or clarify with the team admins if there is some team configuration problem? pocock@vasks:~$ id uid=257051(pocock) gid=257051(pocock) groups=257051(pocock),10800(Debian),40321(pkg-boost),40333(pkg-voip),40894(pkg-xen),40975(debconf-data),40976(debconf-team),41094(pkg-multimedia),50800(scm_Debian),80321(scm_pkg-boost),80333(scm_pkg-voip),80975(scm_debconf-data),80976(scm_debconf-team),81094(scm_pkg-multimedia),110128(pkg-javascript),110791(pkg-monitoring),110804(debian-sponsors),110821(pkg-auth),150128(scm_pkg-javascript),150791(scm_pkg-monitoring),150804(scm_debian-sponsors),150821(scm_pkg-auth) pocock@vasks:~$ cd /git/pkg-xen/ pocock@vasks:/git/pkg-xen$ ls -ld . drwxrwsr-x 11 root scm_pkg-xen 4096 Dec 19 2011 . ","git","None","None","None" 314060,1,"Open",3,14245,"Daniel Baumann",100,"Nobody","2013-03-11 04:58","","2013-03-11 04:58","remove debian-live","please remove the debian-live project an all of it's files, if any. we are not using alioth since many years anymore.","None","None","None","None" 314063,1,"Open",3,1150,"Tony Mancill",100,"Nobody","2013-03-13 04:28","","2013-03-13 04:28","Re: '+' in alioth git repo names","Dear Alioth Site Admins: I happened to notice there are several git repositories on alioth that contain ++ in the repository name, and while git seems to work fine, gitweb doesn't seem to support this. For example, the following return 404s: http://anonscm.debian.org/gitweb/?p=collab-maint/flexc++.git http://anonscm.debian.org/gitweb/?p=collab-maint/png++.git http://anonscm.debian.org/gitweb/?p=collab-maint/fact++.git I realize that this isn't a high priority issue in the scheme of things, but wasn't sure how else to report it. Also, I was wondering what the right way to make folks aware of this limitation would be. Should the setup-repository script on vasks disallow the creation of repositories that contain '+'? Or is there some chance that an update to gitweb would fix the issue? I'm in the midst of migrating several packages to collab-maint may end up naming the repositories with ""pp"" in place of ""++"", but it does seem that most of the Debian infrastructure works correctly with '+', so thought I would ask. Thank you, tony","git","None","None","None" 314102,1,"Open",3,258709,"Florian Schlichting",100,"Nobody","2013-03-19 23:32","","2013-03-19 23:32","please remove my non-DD account fs-guest","I have migrated all project memberships to my new account fsfs, so the old fs-guest can be removed now. Thank you. Florian","None","None","None","None" 314105,1,"Open",3,258703,"Mike Gabriel",100,"Nobody","2013-03-21 11:10","","2013-03-21 11:10","Debian Edu Git namespace -> allow rw-access for all DDs","Hi, on behalf of the Debian Edu project I would like to ask for the possibility to give all DDs rw-access to our new Git repository namespace vasks:/git/debian-edu Andreas Tille reported some similar enhancement for the Debian Med project and we would love to have that in Debian Edu, as well. This report is a duplicate of Alioth tracker issue #313676 which I had filed under my -guest account (mike-gabriel-guest). As there has been no reaction to #313676 and as I am currently migrating from mike-gabriel-guest to sunweaver (DD account), I place a duplicate of the issue into the tracker under my new account (sunweaver). Thanks, Mike","git","None","Remind","None" 314109,1,"Open",3,258706,"Jérémy Lal",100,"Nobody","2013-03-24 09:17","","2013-03-24 09:17","please remove my old kapouer-guest account from alioth","Thank you. Jérémy. ","None","None","None","None" 314111,1,"Open",3,210472,"Hideki Yamane",100,"Nobody","2013-03-25 01:03","","2013-04-12 20:09","alioth: mailing list have been not created yet","Hi, I've submit creation of mailing list yesterday, but not created yet. https://alioth.debian.org/mail/?group_id=100824 What is wrong with it?","Mailinglists","None","None","None" 314134,1,"Open",3,212764,"Antonio Terceiro",100,"Nobody","2013-03-26 01:52","","2013-03-26 01:52","Cannot create new lists","I am trying to create a new list in the Debian-BR project. After I click ""save"", it goes back to list admin page and says ""Projeto Debian-BR does not use the Forum tool"" in a red banner.","None","None","None","None" 314145,1,"Open",3,258703,"Mike Gabriel",100,"Nobody","2013-03-30 17:55","","2013-04-09 01:24","New mailing list debian-edu-sysadmins does not appear in Mailman","Hi, Friday morning (29th March) I created a new mailing list: debian-edu-sysadmins. After having waited for more than 24h the list has not appeared, yet. Another peculiar phenomenon that occurred while requesting the list creation through fusionforge was: The fusionforge WebGUI complained: You do not have Forums activated for Debian Edu (or similar). Only after enabling the Forums tool for the Debian Edu project, I was able to create a mailing list (Mailman). However, this mailing list has not yet appeared. :-( Thanks for your support! Mike aka sunweaver","Mailinglists","None","None","None" 314215,1,"Open",3,210713,"Felipe Sateler",100,"Nobody","2013-04-10 16:49","","2013-04-10 16:49","Add Debian group to repository ACL","Hello admins, Please add all DDs write access to the following git repository: pkg-multimedia/multimedia-blends.git Thanks","git","None","None","None" 314216,1,"Open",3,262343,"Ali Baba",100,"Nobody","2013-04-15 09:04","","2013-04-15 09:04","Please remove account","Please remove the account","None","None","None","None" 314217,1,"Open",3,262357,"Alessandro Marani",100,"Nobody","2013-04-15 19:54","","2013-04-15 19:54","Remove account","Hi, I'd like to know if possible remove my guest account. Thanks in advance Alessandro ","None","None","None","None" 314285,1,"Open",3,267930,"Mathias Behrle",100,"Nobody","2013-05-29 17:32","","2013-05-29 17:32","Policy description for projects on alioth","Hi alioth site admins, According to http://wiki.debian.org/Alioth a project on alioth is required to follow http://lists.debian.org/debian-devel-announce/2003/03/msg00024.html which contains: We may also approve other projects on a case by case basis, for example: [...] - Any other project where you can convince the Alioth's administrators that it will help Debian achieve World Domination. I think, this description while supposedly meant humorously is not appropriate for a policy document. At least this sentence will keep me away from participating on prject work on alioth. I would highly appreciate, if this could be changed. Additionally (please tell me, if I should open another report) it should be evaluated IMHO, if DMs shouldn't be granted the same rights as DDs with respect to project creation etc.. Thanks for considering, Mathias","None","None","None","None" 314286,1,"Open",3,12892,"Loïc Minier",100,"Nobody","2013-05-29 21:09","","2013-05-29 21:09","Broken perms on android-tools/android-tools.git even after fixing repo privacy","Hi, [ NB: I'm not an admin of the android-tools alioth project; I just discovered today that it held a git repo for the android-tools package in Debian that I had updated and uploaded some months ago and hence just joined the android-tools project as a member ] Files and dirs under /git/android-tools/android-tools.git have wrong perms. I believe this is because the repo was originally created with some privacy setting turned on. One of the project admins, Marcin, fixed the repo's privacy settings and after a while (I guess some cron run) this fixed the permissions of the /git/android-tools/android-tools.git directory itself, but not of subdirs. Would you mind fixing the remaining files and dirs under /git/android-tools/android-tools.git to be 2775/664 as I can't chmod them myself? Thanks!","None","None","None","None" 314302,1,"Open",3,2571,"Andreas Metzler",100,"Nobody","2013-06-15 15:58","","2013-06-15 15:58","Impossible to create multiple gt-repositories for a single project.","Hello, as I intend to switch one of the pkg-gnutls packages (p11-kit ) to git I have enabled GIT in the www frontend. According to http://wiki.debian.org/Alioth/Git#Separate_project this should have created a /git/pkg-gnutls/ and allowed me to generate repositories there. However the script generated a separate repository in this directory without without giving me write permissions for /git/pkg-gnutls/ itself: ametzler@vasks:~$ ls -la /git/pkg-gnutls total 28 drwxrwxr-x 3 root root 4096 Jun 15 12:06 . drwxr-xr-x 425 root root 20480 Jun 15 12:30 .. drwxrwsr-x 7 root scm_pkg-gnutls 4096 Jun 15 12:06 pkg-gnutls.git Please fix, thanks in advance. cu Andreas","git","None","None","None" 314303,1,"Open",3,273023,"Lev Lamberov",100,"Nobody","2013-06-17 08:11","","2013-06-17 08:11","Problem with diff and unified diff for webpages","Hello! when trying to open diff or unified diff for old version of some webpage and update version (to update its translation) I'm getting an error and diff is not showing. The error message is as follows: Could not open script http://scm.alioth.debian.org/usr/share/gforge/bin//viewcvs.cgi/webwml/english/releases/wheezy/debian-installer/index.wml?root=webwml&view=diff&r1=1.11&r2=1.13&diff_format=h.","GForge/FusionForge","None","None","None"